Posted by (24.216.70.10) on June 20, 2001 at 10:26:37:
In Reply to: Hard drives posted by Gary on June 20, 2001 at 10:11:49:
Hi Gary
The primary drive should be jumpered to Master and connected the the primary IDE, the secound harddrive should be jumpered to slave, the last connector of the IDE cable should connect to the primary drive the secound connector on the ribbon cable should connect to the slave drive.
The CD-ROM should be jumpered to Master and connected to the secoundary IDE and hooked up to the last connector on the IDE or ribbon cable.