Posted by (24.216.70.53) on November 06, 2001 at 02:53:00:
In Reply to: Floppy fail?? posted by Charles on November 05, 2001 at 21:44:05:
Go into your Bios and set the bootup sequence to
1. IDE0 or primary drive
2. Cdrom drive
3. check for other devices
When the computer boots most Bios are set to boot the the A: drive first. The change above will tell it to boot to your Harddrive first. If you ever need to use a Startup Disk (floppy) you will have to change the sequence to
1. Floppy Drive
2. IDE0 or Primary drive
3. Check for other devices or drives
Or if you want it to boot to the Cdrom you list that first then the IDE0.