Posted by Mike on January 04, 2003 at 20:23:23:
In Reply to: NVidia TNT2 Model 64 PCI DOES NOT SUPPORT DIRECT3D on WIN2K posted by REAL on January 04, 2003 at 17:06:16:
Hi Real
First change your Monitor to the Standard VGA Drivers, then Boot into Safe Mode, uninstall any Nvidia software in the Add/Remove Utility, including the WDM software. Then restart and boot into Windows, it will install the VGA drvers, Then go to the Device Manager and double click the Nvidia card-Update the driver, use the I'll find the driver and select Browse and go to the driver file, some install by clicking the setup.exe in the unzipped files, some you have to direct it to the files. Once the drivers are installed, install the WDM program, check to see if you need these, with my card I do in order for it to work. Then go to the Customize My Desktop-Settings-Advanced Button ( all the Nvidia Tabs should be there) then the Monitor Tab and change the Monitor to a Plug and Play. Then go to System Information-DirectX diagonostics and run all the Video checks. You should be good to go, also make sure you have Diabled or removed any other Graphics Adapters and the software, before you do this.